Car model parts.2


The Commodity of Model Making Acu・Stion Acupuncture Takenaka'original goods.
Please do the combination choice to the usage by goods in stock
3,000 or more about

Information of the latest technology

The superprecision etching part series gotten popular became more
beautiful more finishedby the latest etching technology.the surface
of the half etching uniformly became flat and the table of the form of
a character etc. was cleared.
of the half etching uniformly became flat
and the table of the form of a character etc. was cleared.
Each part
were done by the Nombrittietting method, and in addition, it detached
from Britti and the lineup was done as for the etching parts that were
able to use. Please continue your favors toward the comparison for
the hand, and use by all means.


How to buy Reservation

 Made by Acu・Stion company and generality original part series.
Each scale, and Battireboccsset. The class can three-dimensionally raise Battireboccs by bending the etching parts. Moreover, if the terminal rivet also that is attached parts is installed, wiring becomes possible. (entering by 4 pieces)
Please reproduce Battireboccs such as F-1・WRC general cars. Each scale and 1/12.1/20./24.1/43 are prepared.
Each Battery box Set. 1/12.\2,600 1/20.\2,300 1/24.\2,200 1/43.\2,000
 1/24 for Hasegawa company 250TR Testarossa shield set + addition wind rimThe thin ultra shield and the superprecision etching will reproduce it in the round.
(vacuum form + etching of superprecision)
1/24 250TR Shield Set. \2,100
 The full detail improvement parts for Hasegawa company.
As for content of parts, the superprecision etching mechanical part set obtaining tweezers wheel set air funnel set is collected.
Each part also sells the unit.

1/24 250TR Testarossa mechanical part set       \2,100
1/24 250TR Testarossa wheel set(full metal)    \4,000
1/24 250TR Testarossa obtaining tweezers(entering by two points) \1,900
★ 1/24 250TR Testarossa air funnel ×12     \1,800


1/24 250TR TESTAROSSA Full Set. Full Set. \9,600
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate speaker mesh stoplight reflectors, wheel ballasts, and is various emblem key entrance nameplates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Volkswagen New Beetle Mechanical parts Set. \2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplates, splashboard mat wheel ballasts, and is various emblem key entrance nameplates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Volkswagen 1300 Beetle Mechanical parts Set. \2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate wheel ballasts and is various emblem key entrance nameplates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Mercedes-Benz SLK Mechanical parts Set. \2,100
 Made by Acu・Stion company and generality original part series.
Each scale, and the electrical equipment control box set. The class can three-dimensionally raise the electrical equipment control box by bending the etching parts. Moreover, if connected Jack also who is attached parts is installed, wiring becomes possible. (10 pieces)
Please reproduce the electrical equipment control box such as F-1・WRC.
  Each scale and 1/20./24.1/43 are prepared.
Each Electrical controls box Set. 1/20.\3,500 1/24.\3,400 1/43.\2.900
 Made by the Acu・Stion company and 2008 The FIA F-1 course map data plate. The course data of each war to GP1-GP18 is described clearly in detail. A full map is a generality and high commodity that becomes a calendar, and becomes an exhibition plate by the detached thing. Moreover, it buys and single goods are sold to various maps to be cheap. Please use it for GP that is your desire by all means.
2008 FIA FORMULA WORLD CHAMPIONSHIP
PLATE MAP Full Set.
Full map \4.900  Various maps \900
 Standard detail made of superprecision etching improvement parts for Hasegawa company.
Content of parts various is disk rotor Rageetarpanel steering wheel hubcap and is various mirror seat belt wiper shift gauges and is various emblem intake mesh wheel ballast key entrance trunk belts, ABC pedal meter rims, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  In addition, if the detail is pursued, the full transformer kit set is prepared.
1/24 250TR TESTAROSSA Mechanical parts Set. \2,100
 Made by Acu・Stion company and generality original part series.
1/24 One set of 250TR Testarossa obtaining tweezers & trunk belt buckle of the configuration with 2point unit.
It uses it to fix the trunk of an old car after chiefly 1950.
  Other scales and 1/43 are prepared.
1/24 250TR TESTAROSSA Catchpin Set. (2 point) 1/24 \1,900 (2point Set.) 1/43 \1,200 (single goods)
 Standard detail made of superprecision etching improvement parts for FUJMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wipers, ABC pedals, and is various numberplates and is various emblem intake mesh wheel ballast key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 VW Golf R32 Mechanical parts Set. \2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is assembly type disk rotor caliper hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate shift gauge intake louver intake mesh wheel ballasts and is various emblem key entrances and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 LAMBORGHINI Countach LP500S
Mechanical parts Set. (T. Type)
\2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate Rageetarpanel fan fin wheel ballasts and is various emblem key entrances and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Mercedes-Benz AMG S600 Coupe
Mechanical parts Set.
\2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate Rageetarpanel fan fin wheel ballasts and is various emblem key entrances and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Mercedes-Benz AMG 600SEL
Mechanical parts Set.
\2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate Rageetarpanel fan fin wheel ballasts and is various emblem key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement
1/24 Mercedes-Benz AMG 500SL
Mechanical parts Set.
\2,100
 Standard detail made of superprecision etching improvement parts for FUJMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wipers and is various numberplates and is various emblem intake mesh inner backing wheel ballasts, F1 paddle rear light boards, refueling entrance cap key entrance trunk nets, AB dull foot plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  In addition, if the detail is pursued, the full transformer kit set is prepared.
1/24 F430 Scuderia Mechanical parts Set. \2,300
 Standard detail made of superprecision etching improvement parts for FUJMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wipers and is various numberplates and is various emblem intake mesh wheel ballast key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 VW Golf GTI 3Door V Mechanical parts Set. \2,100
 Made by Acu・Stion company and generality original part series.
  The F-1 seat belt set. The buckle made of the etching of a solid method will reproduce the appearance of solidity. As for the content of the set, the cloth made of the buckle satin made of the etching part decal metal is prepared. Please make various seat belts referring to material.
(with red, yellow, blue.black, and each color)
  Other scales and 1/12・1/20・1/24・1/43 are prepared.
F-1 Seat Belt Set. 1/12.\2.800 1/20.\2.100 1/24.\2.000 1/43.\1.900
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is assembly type disk rotor caliper hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate shift gauge intake louver intake mesh wheel ballasts and is various emblem key entrances and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 LAMBORGHINI Countach LP400
Mechanical parts Set. (T. Type)
\2,100
 Standard detail made of superprecision etching improvement parts for FUJIMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wipers and is various numberplates and is various emblem intake mesh inner backing wheel ballast fan fin suspension bases, refueling entrance cap key entrance trunk nets, AB dull foot plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  In addition, if the detail is pursued, the full transformer kit set is prepared.
1/24 Enzo Mechanical part Set. (F.Type) \2,900
  1/24 superprecision detail made of etching improvement parts for Hasegawa company.
The Rageetarpanel emblem, and content of parts is various mirrors and is various various obtaining pin seat belt Kilsitti template rear light reflectors, engine emblem engine fixation boards, heatproof boards, and caliper wheel ballasts.   Etc . The detail improvement to the detail of the interior exterior is collected to this set.
  The budget set and two point set with the disk rotor are prepared.
1/24  F189 mechanical part & disk rotor set.(two point set)
                                                     \4,900
1/24 F189 Mechanical parts Set \2,200
 1/24 superprecision detail made of etching improvement parts for Hasegawa  company.
The Rageetarpanel emblem, and content of parts is various mirrors and is various various obtaining pin seat belt Kilsitti template rear light reflectors, engine emblems, heatproof boards, the exhaust boards, and caliper wheel ballasts.   Etc . The detail improvement to the detail of the interior exterior is collected to this set.
  The budget set and two point set with the disk rotor are prepared.
1/24  F190 mechanical part & disk rotor set.(two point set)
                                                      
\4,900
1/24 F190 Mechanical parts Set. \2,200
 1/24 scales and generality disk rotor & caliper sets.
The assembly type disk rotor caliper set. Each disk can be piled up and a three-dimensional disk rotor be reproduced by the matched thing.
If central lock nut & shaft sets of the option parts are built in, the gimmick of detaching the tire becomes possible.
1/24 F-1 Disk rotor Set. \2,800
 Made by Acu・Stion company and generality original part series.
The assembly type disk rotor caliper set. Each disk can be piled up and a three-dimensional disk rotor be reproduced by the matched thing.
The kind of the disk rotor 4 kinds and the preparation and the caliper prepare the brand manufacturer of 5 companies. Please do choice from 20 kinds of variations by the combination and use it.
  Four kinds, solid types, the solid ditch insertion types, the drill crossing types, and the crossing types of the disk rotor are prepared.
  Five companies, the Ferrari Co.Ltd, the Lamborghini Co.Ltd, Dr. Ing. h. c. F. Porsche Co.Ltd. Mercedes-Benz Co.Ltd. the Nissan Co.Ltd. are prepared.
1/24 Disk rotor Set. Each \2,400
 Each F-1 suspension of a real similar car can be reproduced with Cot ..inset in.. peel. Please install each part referring to material and the guide of hand.
  1/12.1/20.1/24.1/43 in the usage additionally . The scale was prepared.
1/12.1/20.1/24.1/43 Each other Suspension Base Set. 1/12.\3,500 1/20.\2.800 1/24.\2,700 1/43.\1.900
 Made by Acu・Stion company and generality original part series.
The trunk net set. The net that stores luggage in scale model's trunk. Bending worth can be freely made because an elastic stainless steel. Please use it as detailed parts.
1/24 Trunk net Set. \2,200
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor caliper hubcap Rageetarpanel and is intake mesh and is various mirror seat belt wipers and is various numberplate meter rim speaker panels, ABC pedals, and is various emblem wheel ballast key entrances and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 NISSAN FAIRLADY Z Version NISMO
Mechanical parts Set.
\2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is assembly type disk rotor caliper hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate meter rim wheel ballasts and is various emblem key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 NISSAN 180SX Mechanical parts Set. \2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is assembly type disk rotor caliper hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate meter rim wheel ballasts and is various emblem key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 NISSAN SKYLINE BLACK Special 2000RS HARD TOP Mechanical parts Set. \2,100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is assembly type disk rotor caliper hubcap steering wheel cap and is mirror seat belt wiper and is various numberplate meter rim wheel ballasts and is various emblem key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 NISSAN SKYLINE 2000RS Mechanical parts Set. \2,100
The transformer kit set of 129C2 for FUJIMI company.
As for the content of the kit, the superprecision etching, the sawing thing, and the press part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

Transformer kit : \16,000
Superprecision etching part * mechanical part set
+ disk rotor set
Sawing thing wheel ×4
Sawing thing Sentarroccnat ×4
Data plate ×1

★ Single goods bought easily ..various.. are prepared.

  Mechanical part set     \2.900
  Disk rotor set         \3,100
  Wheel ×4                 \4.200
  
Central lock nut ×4    \3,100
  Carburetor ×2           \1,300
1/20 126C2 Full Set. \16,000
 It got popular, and ..template series.. 1/20 in Sara ..letting go.. The template set for 126C2 joined.
If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car.
The necessaries item for the model production.
1/20 126C2 Good year Tire Paint template Set. \1,400
 The detail made of superprecision etching improvement parts of 1/32 scales for FUJIMI company.
Content of parts various is intake mesh and is emblem and is various mirror wipers and is various obtaining pin seat belt wipers and is numberplate wheel ballast meter various rims, reflectors, nameplates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/32 CANTER Mechanical parts Set. \1,900
 Standard detail made of superprecision etching improvement parts for FUJIMI company.
Content of parts various is intake mesh and is emblem and is various mirror wipers and is various obtaining pin seat belt wipers and is numberplate wheel ballast meter various rims and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 HONDA S800M Sports Mechanical parts Set. \1,900
 Made by Acu・Stion company and generality original part series.
The pedal set. It is possible to use it for scale model's pedal. The ABC pedal of each car was prepared. Please use it as detailed parts.
1/24 Pedal Set. \1,500
 Made by Acu・Stion company and generality original part series.
The steering wheel set. It is possible to use it for scale model's steering wheel. The steering wheel of each car was prepared. Please use it as detailed parts.
1/24 Steering wheel Set. \1,900
 Made by Acu・Stion company and generality original part series.
Shiftogagetoset. It is possible to use it for scale model's gear-shift gauge. The shift gauge of each car was prepared. Please use it as detailed parts.
1/24 Shift gate Set. \2,100
 Made by Acu・Stion company and generality original part series.
The trunk belt set. The belt buckle that fixes luggage in scale model's trunk. Bending worth can be freely made because an elastic stainless steel. Please use it as detailed parts.
1/24 Trunk belt Set. \2.300
The glass stop obtaining tweezers are the glass stop obtaining pins of the racing car. The scale size ..various.. was prepared. Please additionally do choice to the usage, and use it.

@Standard type
AStandard type(minute type)
B1.2 time type
C1.2 time type(minute type)
D1.5 time type
E1.5 time type(minute type)
F2.0 time type
G2.0 time type(minute type)
1/12.1/20.1/24.1/43. Glass stop catchpin Set. 1/12.\2.400 1/20.\2.000 1/24.\1.900 1/43.\1.500
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
The mirror, and content of parts is various various various obtaining pin seat belt Kilsitti template rear light reflectors and engine emblem hose band suspension base wheel ballasts the Rageetarpanel emblem.   Etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
  The budget set and two point set with the disk rotor are prepared.
1/20 Tyrrell YAMAHA 023 Mechanical parts Set. \2.100 2point Set \5.100
  The plate where GP Gramprin (Ayrton Senna and world champion's monuments)16 wars done to 1991 were marked in detail.
The plate where 16 all wars were collected can be used as an exhibition plate of the model car by becoming a calendar and separating each war. Moreover, single goods sales were prepared according to customer's needs.
1991 FIA FORMULA WORLD CHAMPION :
Ayrton Senna da Silva
Full set \3.800 single goods \700
  As for the damper rod set produced in our latest technology, superprecision etching & extra fine stainless pin is collected. Choice can be able to be done to the damper rod of each model by assembling each part and to use it widely.
1/12.1/20.1/24.1/43. Damper rod Set. 1/12.\2.400 1/20.\2.100 1/24.\2.000 1/43.\1.800
 Standard detail made of superprecision etching improvement parts for FUJIM company.
Content of parts various is disk rotor and is various emblems and is various mirror wipers and is various obtaining pin seat belt wipers and is numberplate wheel ballast speaker meter various rims and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  
Porsche Please use it to make the work of 911 series.
1/24 PORSCHE 911 Turbo'91 (964)
Mechanical parts Set.
\2.100
 Standard detail made of superprecision etching improvement parts for FUJIMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wiper Rageetarbanel and is various numberplates and is various emblem meter rim wheel ballast obtaining pin key entrance air intake meshes and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 PORSCHE Cayman Mechanical parts Set. \2.100
 As for the anchor hook set produced in our latest technology, superprecision etching & extra fine stainless pin & precise pipe is collected. Choice can be able to be done to fixed Sta of each model by assembling each part and to use it widely.
(The example: I will reproduce it in the round as fixed Sta such as under an engine wing chassis. Please give the real car material photograph etc. to me in the reference. )
1/12.1/20.1/24.1/43. Anchor hook Set. 1/12.\2.900 1/20.\2.400 1/24.\2.300 1/43.\1.900
 The template series gotten popular let go and joined Sara the template set for the motor cycle.
The scale prepared 1/12. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car.
It can be said to the model production the necessaries item. It recommends in the tire logo of (BRIDGESTONE) as correspondence and it recommends it for the post.
1/12 Motorcycle Tire Paint template Set.
(BRIDGESTONE)
\1.400
 1/24 for TAMIYA company ZENT CERUMO SC 2006 The detail made of correspondence etching improvement parts. Content of parts various is intake mesh and is various emblems and is various mirrors and is various obtaining pin seat belts, refueling entrances, wiper disk rotor rotor hubs, pulling hooks, ABC pedal wheel ballast tire templates, index hooks, refueling entrances, emblem base plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.  Please use it for right or wrong if you pursue a further detail improvement.
1/24 ZENT CERUMO SC 2006 Mechanical parts Set. \2.100
 The template series gotten popular let go and joined Scale Radiator Paint template Set.
The scale prepared 1/12.1/20.1/24.1/43 all. If the air brush is done by using Pescon on the market, the logo of Rageetar can be posted to a real similar car.
The template of the necessaries item for the model production.
1/12.1/20.1/24.1/43. Radiator Paint template Set. 1/12.\2.200 1/20.\2.000 1/24.\1.900 1/43.\1.600
 1/24 for TAMIYA company Mobil 1 SC 2006 The detail made of correspondence etching improvement parts. Content of parts various is intake mesh and is various emblems and is various mirrors and is various obtaining pin seat belts, refueling entrances, wiper disk rotor rotor hubs, pulling hooks, ABC pedal wheel ballast tire templates, index hooks, refueling entrances, emblem base plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.  Please use it for right or wrong if you pursue a further detail improvement.
1/24 Mobil 1 SC 2006 Mechanical parts Set. \2.100
 The detail made of Biccscal superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel emblem side-view mirror seat belt Kilsitti template rear light reflector, engine emblem hose band, heatproof board, wheel ballast serial number, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is. The budget set ..various.. is prepared.
1/12 MP4/6 Mechanical parts Set. \3.400
 Generality, and the air funnel. Parts of the recommendation in the kit parts in not satisfactory.
The precise Hi coming thing will reproduce the air funnel the super-in full scale.
1/12 Air funnel×12 \3.100
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts is various disk rotors and is various Rageetarpanel and is various intake meshes and is various emblem engine emblems and is various mirrors and is various obtaining pin seat belt wipers and is various numberplate hubcap wiper shift gauge mesh backing and ABC pedal trunk bands etc . As for the detail improvement to the detail of the interior exterior, the condensation collection is done by this set.
1/24 599 GTB FIORANO Mechanical parts Set. \2.100
 1/24 for TAMIYA company OPEN INTERFACE TOM 'S SC430 2006 The detail made of correspondence etching improvement parts. Content of parts various is intake mesh and is various emblems and is various mirrors and is various obtaining pin seat belts, refueling entrances, wiper disk rotor rotor hubs, pulling hooks, ABC pedal wheel ballast tire templates, index hooks, refueling entrances, emblem base plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.  Please use it for right or wrong if you pursue a further detail improvement.
1/24 OPEN INTERFACE TOM'S SC430 2006
Mechanical parts Set.
\2.100
 The refueling SC430 entrance set for TAMIYA company. In the kit parts, in not satisfactory, sets of the recommendation. The part composition will reproduce the refueling entrance the super-in full scale if it combines by the sawing thing and the superprecision etching.
1/24 OPEN INTERFACE TOM'S SC430 2006
by Filler cap Set.
\1.900
 The our company's original and 2006 The FIA F-1 course map data plate. The course data of each war to GP1-GP17 is described clearly in detail. A full map is a high generality, become a calendar, become an exhibition plate by the detached thing, commodity. Moreover, it buys and various maps are easy like cheapness. Please use it for GP that is your desire by all means.
2007 FIA FORMULA WORLD CHAMPIONSHIP
PLATE MAP Full Set.
Full map \4.900  Various maps \900
 Standard detail made of superprecision etching improvement parts for TAMITA company.
The Rageetarpanel emblem, and content of parts is various mirrors and is various various obtaining pin seat belt Kilsitti template Jakkeappsta rear light reflectors, engine emblem hose band suspension bases, heatproof boards, and wheel ballasts.   Etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
  The budget set ..various.. is prepared.
1/20 MP4/5B Mechanical parts Set. \2.300
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts is various disk rotors and various Rageetarpanel various intake meshes and various emblem engine emblems and various mirrors and various obtaining pin seat belt wipers and various numberplate rear light rim hubcap wiper shift gauges and various light reflectors and ABC pedal wind rims etc . As for the detail improvement to the detail of the interior exterior, the condensation collection is done by this set.
1/24 F-40 Mechanical parts Set. (F.Type) \2.900
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts various is disk rotor intake mesh and is various emblems and is various mirror wipers and is various obtaining pin seat belt wipers and is various numberplate wheel ballasts and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  
Please use it to make the work of the historic car
1/24 NISSAN SKYLINE 2000 GT-B
Mechanical parts Set.
\2.100
 Standard detail made of superprecision etching improvement parts for Revel company.
Content of parts various is disk rotor disk rotor hub caliper, refueling entrance, and is mirror seat belt, heatproof board, Rageetarpanel side deflector Jakkeappsta wheel ballast obtaining pin, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please give finish to the final product that externals are in right or wrong.
1/24 BMW Sauber F-1Team Mechanical parts Set. \2.000
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wipers and is various numberplates and is various emblem intake mesh wheel ballast obtaining pin key entrance shift gauges and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 BB512 Mechanical parts Set. \2.100
 FXX mechanical part set for TAMIYA company. In the etching of sales according to the kit, in a little not satisfactory, the set of the recommendation.
  Content of parts various is Ddocabar oil cap and is emblem seat belt, refueling entrance, numberplate, pulling hook wheel ballast suspension base obtaining pin, and etc to the disk rotor hubcap and various intake mesh Rageetarbanel Rageetarfan and various mirrors and the AB pedal foot plate wiper engines . Overwhelming part composition.
  It can be called a commodity that it is large satisfactory only to see the main body of the etching.
1/24 FXX Mechanical parts Set. \2.900
 The refueling FXX entrance set for TAMIYA company. In the kit parts, in a little not satisfactory, sets of the recommendation. The part composition will reproduce the refueling entrance the super-in full scale if it combines by the sawing thing and the superprecision etching.
1/24 FXX Filler Cap Set. (Racing Type) \1.200
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is disk rotor
hubcap and is various mirror seat belt wipers and is various numberplates and is various emblem meter rim wheel ballast obtaining pin key entrance trunk net wind blowers and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/20 Renault RE-30B Mechanical parts Set. \2.100
 Standard detail made of superprecision etching improvement parts for FUJIMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wiper Rageetarbanel and is various numberplates and is various emblem meter rim wheel ballast obtaining pin key entrance air intake meshes and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 PORSCHE Cayman S Mechanical parts Set.) \2.100
 Standard detail made of superprecision etching improvement parts for FUJIMI company.
Content of parts various is disk rotor hubcap and is various mirror seat belt wiper Rageetarbanel and is various numberplates and is various emblem meter rim wheel ballast obtaining pin key entrance air intake meshes and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 NISMO BNR34 SKYLINE GT-R
Mechanical parts Set.
\1.900
 The detail made of superprecision etching improvement parts for Hasegawa company and for standard 348tb.
Content of parts various is disk rotor and is various disk rotor Rageetarpanel and is various intake meshes and is various numberplates and is various emblem engine emblems and is various mirrors and is various obtaining pin seat belt wiper hubcap wiper shift gauges and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 348tb Mechanical parts Set. (H.Type) \2.200
 The detail made of superprecision etching improvement parts for Hasegawa company and for standard 348ts.
Content of parts various is disk rotor and is various disk rotor Rageetarpanel and is various intake meshes and is various numberplates and is various emblem engine emblems and is various mirrors and is various obtaining pin seat belt wiper hubcap wiper shift gauges and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 348ts Mechanical parts Set. (H.Type) \2.200
 The detail made of superprecision etching improvement parts for Hasegawa company and for standard 328GTB.
Content of parts various is disk rotor and is various disk rotor Rageetarpanel and is various intake meshes and is various numberplates and is various emblem engine emblems and is various mirrors and is various obtaining pin seat belt wiper hubcap wiper shift gauges and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 328GTB Mechanical parts Set. (H.Type) \2.100
 The detail made of superprecision etching improvement parts for Hasegawa company and for standard 328GTS.
Content of parts various is disk rotor and is various disk rotor Rageetarpanel and is various intake meshes and is various numberplates and is various emblem engine emblems and is various mirrors and is various obtaining pin seat belt wiper hubcap wiper shift gauges and etc . The detail improvement to the detail of the interior exterior is collected to this set.
1/24 328GTS Mechanical parts Set. (H.Type) \2.100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
The disk rotor, and content of parts is various Rageetarpanel Oilrageetarpanel emblems and various obtaining pin seat belt Kilsitti template wheel ballasts.   Etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
1/20 BRABHAM BT50 BMW TURBO
Mechanical parts Set.
\2.100
 1/24 for TAMIYA company TAKATA DOME NSX 2005.The detail made of correspondence etching improvement parts.
Content of parts various is Rageetarpanel and is various intake meshes and is various emblems and is various mirrors and is various obtaining pin seat belt reception desk fin wiper disk rotor rotor hub steering wheel paddles, ABC pedal wheel ballast marking templates, index hooks, refueling entrances, emblem base plates, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you pursue a further detail improvement.
1/24 TAKATA DOME NSX 2005 Mechanical parts Set. \2.200
 Uindobrobaset can be widely used for various Uindobroba the superprecision etching being made. The scale ..various.. is prepared.
Please occur, raise one one each fin, and install use on the air entrance.
1/12.1/20.1/24. Window blower Set. 1/12\2.900 1/20\2.200 1/24\2.100
 The template series gotten popular let go and joined Sara PIRELLI PZERO.
The scale prepared 1/12.1/20.1/24.1/43 all. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car.
It can be said to the model production the necessaries item.
It recommends in the tire logo of F-1 since 1990 as correspondence and it recommends it for the post.
1/12.1/20.1/24.1/43 PIRELLI PZERO Template Set. 1/12(2P)\2.100 1/20\2.100 1/24\1.700 1/43\1.4000
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel Oilrageetarpanel emblem and is various mirrors and is various obtaining pin seat belt Kilsitti template hose band disk rotor rotor hubs, heatproof boards, wheel ballasts, reflectors, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
The budget set to which the disk rotor set is attached is prepared.
1/20 Jordan 191 Mechanical parts Set \2.100  2point set \5.100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel Oilrageetarpanel emblem and is various mirrors and is various obtaining pin seat belt Kilsitti template hose band disk rotor rotor hubs, heatproof boards, wheel ballasts, reflectors, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
The budget set to which the disk rotor set is attached is prepared.
1/20 Brown Tyrrell HONDA 020 Mechanical parts Set. \2.100  2point set \5.100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel Oilrageetarpanel emblem and is various mirrors and is various obtaining pin seat belt Kilsitti template hose band disk rotor rotor hubs, heatproof boards, wheel ballasts, reflectors, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
The budget set to which the disk rotor set is attached is prepared.
1/20 FW13B Mechanical parts Set. \2.100  2point set \5.100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel Oilrageetarpanel emblem and is various mirrors and is various obtaining pin seat belt Kilsitti template hose band disk rotor rotor hubs, heatproof boards, wheel ballasts, reflectors, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
The budget set to which the disk rotor set is attached is prepared.
1/20 Lotus 107B Ford Mechanical parts Set. \2.100  2point set \5.100
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts various is Rageetarpanel Oilrageetarpanel emblem and is various mirrors and is various obtaining pin seat belt Kilsitti template hose band disk rotor rotor hubs, heatproof boards, wheel ballasts, reflectors, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for your work that gives one's whole mind and is.
The budget set to which the disk rotor set is attached is prepared.
1/20 Benetton Ford B192 Mechanical parts Set. \2.100  2point set \5.100
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts various is disk rotor Uindodifcrectar steering wheel cap and is various mirror seat belt wipers and is various numberplate meter rim wheel ballast obtaining pin key entrance air intakes, ABC pedals, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 Mazda Roadster Mechanical parts Set. \2.100
 The transformer kit set of Benz SLR McLaren for TAMIYA company.
As for the content of the kit, the superprecision etching, the sawing thing, and the metal part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. The part group that researches a real car will reproduce the detail improvement to the detail.
Please test your skill by all means.

Transformer kit : \152.00
Superprecision etching part * mechanical part set.
Sawing thing * suspension ×4
Metal part * mechanical parts ×9
Japanese version and English version data plate ×1

Single goods bought easily ..various.. are prepared.

  Etching              \2.200
  Suspension ×4   \6.000
  Metal parts ×9   \5.200

  Japanese version and English version data plate Each \1.900
1/24 Mercedes-Benz SLR McLaren Full transformer Set. Full Set. \15.200
 The short hose band set was newly released to a standard hose band series. Various scales were prepared.
Scale..kind..preparation..provide..scale model..including..wide..use.
The material is various scales, and made of stainless steels.
1/12.1/20.1/24.1/43.Hose Band Silver Short Type \2.300 \2.100 \1.900 \1.400
 It let go and 1/18 scales that were Sara joined the template series gotten popular. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car. It can be said to the model production the necessaries item. It recommends in the tire logo of F-1 before 2001 as correspondence and it recommends it for the post.
1/18 Good year Tire Paint template Set \2.100
  It let go and 1/18 scales that were Sara joined the template series gotten popular. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car. It can be said to the model production the necessaries item. It recommends in the tire logo of F-1 since 2001 as correspondence and it recommends
1/18 POTENZA arrow Tire Paint template Set. \1.800
 An our company's original generality parts, and each scale mirror sets.
I will reproduce the mirror of a real similar car if it puts it on parts of a kit on the market. Please do the compound multiplication, make the surface specular finish, and use it.

Please refer to the following for the price of the case scale.

1/24. Mirror set (etching)     \2.100
1/43. Mirror set (etching)     \1.600
1/24.1/43 Mirror Set. \2.100
 The obtaining tweezers of spring for 1/24 scales. The minimum in the world superprecision spring was adopted, and the opening and shutting of real auto similar obtaining pin was enabled. The Gr.car etc. can use a wide model.
  Please install it referring to material etc. while managing close attention.
1/24 Spring Catchpin Set. \2.300
 Standard detail made of superprecision etching improvement parts for TAMIYA company.
Content of parts is a hubcap and is various disk rotors and is various Rageetarpanel wheel rim lock pins and various tire templates ‥ various mirror and various obtaining pin seat belt wiper meter rim traction hook light reflectors, Kilsitti, refueling entrance, and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Attached attached Feirar cap set was released.
  Please use it to make the work of C-car that is the desire.
1/24 TOYOTA TOM'S 84C 2point Set. Etching \2.100 Set \4.100
 Standard detail made of superprecision etching improvement parts for Fujimi company.
Content of parts various is disk rotor Rageetarpanel steering wheel cap and is various mirror seat belt wipers and is various numberplate meter rim wheel ballast obtaining pin key entrance base plates and etc . The detail improvement to the detail of the interior exterior is collected to this set.
  Please use it for right or wrong if you give a further detail improvement.
1/24 RE AMEMIYA μKAKYUATSUJOSHO7 SPL
Mechanical parts Set.
\2.100


It will update every month because there are too a lot of commodities and link, please.
Please claim General Cataloge want to learn all information.