Car model parts.4


The Commodity of Model Making Acu₯Stion Acupuncture Takenaka'original goods.
Please do the combination choice to the usage by goods in stock
3,000 or more about

Information of the latest technology

The superprecision etching part series gotten popular became more
beautiful more finishedby the latest etching technology.the surface
of the half etching uniformly became flat and the table of the form of
a character etc. was cleared.
of the half etching uniformly became flat
and the table of the form of a character etc. was cleared.
Each part
were done by the Nombrittietting method, and in addition, it detached
from Britti and the lineup was done as for the etching parts that were
able to use. Please continue your favors toward the comparison for
the hand, and use by all means.


How to buy Reservation

@The transformer kit set of FW14B for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum parts are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

š Transformer kit: \12,100

Superprecision etching part * mechanical part set
+ disk rotor set
Sawing thing Earfannel ~10
Sawing thing Sentarroccnat ~4
Sawing thing Earbalbset ~4
Privilege sponsor decal

š Single goods bought easily ..various.. are prepared.

  Mechanical part set        \2,500
  Disk rotor set           @@@\2,100
  Air funnel ~10          @@ \1,900
  Central lock nut set ~4  \3,100
  Air valve set ~4        @@ \1,300
1/20 FW14B 5point Full transformer Set. \12,100
 1/24 for TAMIYA company PORSCHE 935/78 MOBY DICKgMARTINI" The detail made of correspondence etching improvement parts.
Content of parts various is disk rotor disk rotor hub caliper intake mesh Rageetarpanel and is various emblems and is various mirror wiper seat belt wipers and is various emblems and is various obtaining pin wheel ballast base plates and etc . Even the detail of the interior exterior is collected to this set.
1/24 PORSCHE 935/78 MOBY DICKg MARTINIh Mechanical parts Set. \2,600
  The full transformer kit set of Lotus type 79 for TAMIYA company.
As for the content of the kit, the superprecision etching, the sawing thing, and the white metal press part spring decal data plate are collected. I will reproduce the detail improvement to the detail by Matirial material and abundant part compositions.
Single goods sales are . ..the preparation... Full Toranskittosetsu for morality is recommended. Please test your skill by all means.

š Single goods bought easily ..various.. are prepared.

Data plate No.5 (Mario Gabriele Andretti specification) \1,900
Data plate No.6 (Benct Ronnie Petarson specification) \1,900
Mechanical part set \2,800 (with attached decal)(T. company)
Wing set \2,900 (with attached decal)
Two point set \5,600 (mechanical part & wing set)
Disk rotor set \2,100 (T. company)
Three point set \7,500 (mechanical part & wing & disk rotor set)
8 carburetor ~ \800
Eight (sawing thing & etching) air funnel ~ \1,600
4 air valve set ~ \1,300
Suspension set \6,000 (sawing thing & etching)
Central lock nut set \3,100 (sawing thing & etching)
Wheel set \4,200
Wheel & center lock nut set \7,200
Wheel & center lock nut set \12,000 (final product air valve set ~4)
Rageetar & suspension arm set \2,500 (white metal)
Muffler & mechanical part set \2,200 (white metal)
Engine set \2,600 (white metal)
Three point set \7,000 (white metal)
Mechanical part & art decal \4,800
14 point full set No.5+ art decal \29,000 (Mario Gabriele Andretti specification)
14 point full set No.6+ art decal \29,000 (Benct Ronnie Petarson specification)

¦ Another sales
Good year tire paint template set \2,000

¦ The latest technology and the resin plating are introduced. I will process the plating of all plastic parts.
Lotus type 79 Resin plating processing ASK of 1978 Almimonococcc
1/20 Lotus Type 79 1978 14point Full Set.(No.5 & No.6) Full Set. \29,000
@The full transformer kit set of Lotus type 79 for Hasegawa company.
As for the content of the kit, the superprecision etching, the sawing thing, and the white metal press part spring decal data plate are collected. I will reproduce the detail improvement to the detail by Matirial material and abundant part compositions.
Single goods sales are . ..the preparation... Full Toranskittosetsu for morality is recommended. Please test your skill by all means.

š Single goods bought easily ..various.. are prepared.

Data plate No.5 (Mario Gabriele Andretti specification) \1,900
Data plate No.6 (Benct Ronnie Petarson specification) \1,900
Mechanical part set \2,800 (with attached decal)(T. company)
Wing set \2,900 (with attached decal)
Two point set \5,600 (mechanical part & wing set)
Disk rotor set \2,100 (T. company)
Three point set \7,500 (mechanical part & wing & disk rotor set)
2 carburetor ~ \800
Eight (sawing thing & etching) air funnel ~ \1,600
4 air valve set ~ \1,300
Suspension set \6,000 (sawing thing & etching)
Central lock nut set \3,100 (sawing thing & etching)
Wheel set \4,200 (four spoke)
Wheel & center lock nut set \7,200 (four spoke)
Wheel & center lock nut set \12,000 (four spoke)(final product air valve set ~4)
Central lock nut set \3,100 (sawing thing & etching)
Wheel set \4,200 (six spoke)
Wheel & center lock nut set \7,200 (six spoke)
Wheel & center lock nut set \12,000 (six spoke)(final product air valve set ~4)
Mechanical part & art decal \4,900
12 point full set No.5+ art decal \26,000 (Mario Gabriele Andretti specification)
12 point full set No.6+ art decal \26,000 (Benct Ronnie Petarson specification)

¦ Another sales
Good year tire paint template set \2,000

¦ The latest technology and the resin plating are introduced. I will process the plating of all plastic parts.
Lotus type 79 Resin plating processing ASK of 1978 Almimonococcc
1/20 Lotus Type 79 1978 12point Full Set.(No.5 & No.6) Full Set. \26,000
  It let go and Sara and 1/20 scales joined the template series gotten popular.
If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car.
It can be said to the model production the necessaries item.
It risks, it recommends in the tire logo, and it recommends it for the transcript for Lotus Type 79.
1/20 Lotus Type 79 1978 Good year Tire Paint template Set. \2,000
@1/24 for TAMIYA company 1/24 ASTON MARTIN DBS Mechanical parts Set. The detail made of correspondence etching improvement parts.
Content of parts various is disk rotor disk rotor hub Rageetarpanel and is various emblems and is various mirror wiper seat belt wipers and is various emblems and is various obtaining pin wheel ballasts, ABC pedal base plates, and etc . Even the detail of the interior exterior is collected to this set
1/24 ASTON MARTIN DBS Mechanical parts Set. \2,200
@The transformer kit set of Benz SLR McLaren 722 Edition for TAMIYA company.
As for the content of the kit, the superprecision etching, the sawing thing, and the metal part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. The part group that researches a real car will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \152.00
Superprecision etching part * mechanical part set.
Sawing thing * suspension ~4
Metal part * mechanical parts ~9
Japanese version and English version data plate ~1

šSingle goods bought easily ..various.. are prepared.

  Etching              \2.200
  Suspension ~4   \6.000
  Metal parts ~9   \5.200

  Japanese version and English version data plate Each \1.900
1/24 Mercedes-Benz SLR McLaren 722 Edition Full transformer Set. Full Set. \15.200
  The transformer kit set of MP4/5 for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

š 
Transformer kit: \15,000
Vacuum parts
Superprecision etching part * mechanical part set
+ disk rotor set
Sawing thing Earfannel ~10
Sawing thing Sentarroccnat ~4
Sawing thing Earbalbset ~4
Data plate ~1(Either of No.1 No.2 is selected. )
Privilege sponsor decal

š 
Single goods bought easily ..various.. are prepared.

  Vacuum parts \1,000
  Mechanical part set           \2,500
  Disk rotor set           @@@@\2,100
  10 air funnel ~@@@@@@@ \1,900
  Central lock nut set ~4  @ \3,100
  Air valve set ~4          @@@\1,300
  Data plate ~1             @@@\1,800
1/20 MP4/5 Detail up parts Set. Full Set. \15,000
@The transformer kit set of FW16 for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum parts are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

š Transformer kit: \20,000
Vacuum parts
Superprecision etching part * mechanical part set
+ wing set + disk rotor set
Sawing thing Fararcapp
Sawing thing Saspenshonset
Sawing thing Earfannel ~10
Sawing thing Sentarroccnat ~4
Sawing thing Earbalbset ~4
Privilege sponsor decal

š Single goods bought easily ..various.. are prepared.

  Vacuum parts \1,000
  Mechanical part set           \2,500
  Disk rotor set          @@@@ \2,100
  Wing set @@@@@@@@@@@@\2,600
  Filler cap@@@@@@@@@@@@\2,100
  10 air funnel ~ @@@@@@@\1,900
  Suspension set @@@@@@@@\3,100
  Central lock nut set ~4   @\3,100
  Air valve set ~4         @@@\1,300
‚Π
1/20 FW16 Detail up parts Set. Full Set. \20,000
@One mechanical part set for Revell company of the configuration with 1/24 California unit.
Content of parts various is disk rotor disk rotor hub Rageetarpanel and is various emblems and is various numberplates and is various mirror wiper seat belt wipers and is various emblems and is various obtaining pin wheel ballasts, ABF pedal base plates, and etc . Even the detail of the interior exterior is collected to this set.
Entering by four and two point exhaust opening ~ set are prepared as another sales parts.

1/24 California Exhaust entrance
\1,600
1/24 California Mechanical parts & Exhaust entrance Set.
\3,900
1/24 California Mechanical parts Set. Set. \3,900
@This product will reproduce the suspension push rod by combining the etching parts and the sawing thing parts.
š  Pattern collection parts
The slit type largeness and the smallness are collected to A block.
The solid type largeness and the smallness are collected to B block.
Please change the combination referring to material and install it.
1/20 Push rod Set. ~10 pieces (Sawthing) Set. \2,900 Ecting \1,700
@The transformer kit set of F187/88C for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

š Transformer kit: \11,800
Superprecision etching part * mechanical part set
+ wing set + disk rotor set
Sawing thing Sentarroccnat ~4
Sawing thing Earbalbset ~4
Data plate ~1(Either of No.27 No.28 is selected. )
Privilege sponsor decal

š Single goods bought easily ..various.. are prepared.

  Mechanical part set          \2,500
  Disk rotor set           @@@\3,100
  Central lock nut set ~4   \3,100
  Air valve set ~4         @@ \1,300
  Data plate ~1              @@\1,800
1/20 F187/88C Full Set. (No.27& No.28) Full Set. \11,800
@The transformer kit set of 312T for Hasegawa company. As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \21,500
Superprecision etching part * mechanical part set
+ disk rotor set + wing set
Vacuum parts

Sawing thing wheel ~4
Sawing thing Center rock nut Set.~4
Sawing thing Air funnel~12
Sawing thing & etching refueling entrance~3

Data plate~1(Either of @No.11 No.12 is selected. )

šSingle goods bought easily ..various.. are prepared.

  Mechanical part set     @ \2,200
  Wing set                 @@@\1,500
  Vacuum parts          @@@ \1,000

  Disk rotor set     @@@@@ \3,100
  Wheel ~4                  @@\4,200
  Central lock nut ~4   @ @\3,100
  
Air funnel ~12     @@@@ \2,400
  Fell caps ~3  @ @@@@@@\3,100
  Data plate             @@@@\1,800

Another sales


š 1/20 312T Good year Tire Paint template Set. (Non britti Type)  \2,100
1/20 312T Detail up parts Set. (No.11 & No.12) Full Set. \21,500
@The full transformer kit set of F60 for TAMIYA company.
As for the content of the kit, the superprecision etching, the sawing thing, and the white metal decal data plate are collected. I will reproduce the detail improvement to the detail by part compositions abundant as the micro etching is collected.
Please test your skill by all means.

š Full transformer kit: \22,200
Superprecision etching part * mechanical part set
(micro etching attachment)
+ wing set + disk rotor set
Sawing thing Sentarroccnat ~6
Sawing thing Earbalbset ~4
Sawing thing antenna ~4
Sawing thing exhaust entrance ~2
Sawing thing & etching refueling entrance ~1
White metal & etching ~1
Decal ~2(privilege decal collection)  
Data plate ~1(Either of No.3 No.4 is selected. )
Privilege sponsor decal

š Single goods bought easily ..various.. are prepared.

  Mechanical part set.(with attached decal) \2,700
  Wing set              \1,400
  Disk rotor & tire decal set  \3,100
  Fararcapp & decal set ~1@\2,100
  Central lock nut set ~6    \3,100
  Air valve set ~4               \1,300
  Antenna set ~2             @ \1,200
  Exhaust opening ~2        @ \800
  Three point set(white metal & etching) 
@@@@@@@@@@@@@@@@@@\5,700
  Decal ~2                         \2,100
  Data plate                        \1,800

Another sales

š 1/20 F60 POTENZA arrow Tire Paint template Set. (Non britti Type)   \1,900
š 1/20 F60 Exhaust entrance (TitaniumEharden process)   \2,600
1/20 F60 13point Full Set. (No.3 & No.4) Full Set. \22,200
@The transformer kit set of F2007 for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

š Transformer kit : \20,000
Superprecision etching part * mechanical part set
+ wing set + disk rotor set
Sawing thing Sentarroccnat ~6
Sawing thing Earfannel ~8
Sawing thing Earbalbset ~4
Sawing thing antenna ~2
Sawing thing exhaust entrance ~2

Sawing thing & etching refueling entrance ~1
Data plate~1(Either of No.5 No.6 is selected. )
Privilege sponsor decal

š@Single goods bought easily ..various.. are prepared.

  Mechanical part set    @@\2,500
  Wing set                     @\2,500
  Disk rotor set           @@ \3,100
  Central lock nut set ~6  \3,100
  Air funnel ~8             @@\1,600
  Air valve set ~4        @@ \1,300
  Antenna set ~2                \600

  Exhaust entrance ~2      \1,200
  
Feller caps~1       @@@@\2,100
  Data plate                  @@\1,800
1/20 F2007 Detail up parts Set. (No.5 & No.6) Full Set. \20,000
@Acu₯Stion original Co. is template various sets. If parts are detached from the fixed seal tape, it is possible to use it at once because this product adopts the Nombritti method.
The tool etc. that tend to be the products so far and there is no separation work. The product gotten from beginner's Mr. modeler-Mr. professional modeler popular.

  Each scale prepared Good yearEFirestoneE DUNLOP & DENLOC with 1/24 & 1/43. Please give the chase to the usage additionally.
Tire Paint template Set. 1/24 \1,700 1/43 \1,400
@1/20 for TAMIYA company  The F189 wind shield. The vinyl chloride board of an ultra thin 0.2t was finished up in Sharp by the vacuum construction. The attached helmet visor is attached. (It is built with an ultra thin 0.1t vinyl chloride board. )
1/20 F189 Wind shield \1,000
@1/20 for TAMIYA company Tyrrell P34 Correspondence etching + sawing thing + detail made of press parts improvement part set.
The mirror template carburetor mesh, and content of parts various is various various emblems and is various various obtaining pin wheel ballasts, ABC pedals, and etc the emblem disk rotor disk rotor hub Rageetarpanel 0.1t etching parts.
  Various 0.3t etching parts and wing, prop, seat belt, and etc.
Sawing thing and air made of aluminum funnel ~ eight entering
Press made of part stainless steel press part air funnel cover ~ eight entering
  Even the detail of the interior exterior is collected to this set.

š Single goods bought easily ..various.. are prepared.

  Mechanical part set      \2,800
  Wing set                      \2,900
  Air funnel ~8             @\1,500
  Air funnel cover ~8       @\550
1/20 Tyrrell P34 4point Set. (Japan GP Type) 4point Set. \7,400
@It let go and 1/20 scales that were Sara joined the template series gotten popular. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car. It can be said to the model production the necessaries item. It recommends in the tire logo of @Tyrrell P34 correspondence and it recommends
1/20 Tyrrell P34 Good year Tire Paint template Set. \2,000
@The transformer kit set of MP4/6 or Fujimi company. As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \16,200
Superprecision etching part * mechanical part set
+ disk rotor set + wing set
Vacuum parts
~2
Sawing thing Center rock nut Set.~4
Sawing thing Air funnel~12
Decal~1
Data plate~1(Either of @No.1 No.2 is selected. )

šSingle goods bought easily ..various.. are prepared.

  Mechanical part set.     @ \2,500
  Air valve Set.~4     @@@ \1,300
  Vacuum parts          @@@ \1,000

  Disk rotor set.     @@@@@ \3,100
  Central lock nut ~4   @ @\3,100
  
Air funnel ~12     @@@@ @\2,100
  Data plate             @@@@@\1,800
1/20 MP4/6 Detail up parts Set. (No.1 & No.2) Full Set. \16,200
@1/24 for TAMIYA company NISSAN 370Z The detail made of correspondence etching improvement parts.
Content of parts various is disk rotor disk rotor hub Rageetarpanel and is various emblems and is various mirror wiper seat belt wipers and is various emblems and is various obtaining pin wheel ballasts, ABCF pedal base plates, and etc . Even the detail of the interior exterior is collected to this set.
1/24 NISSAN 370Z Mechanical parts Set. \2,100
@1/24 for Fujimi company Dino 206 Competizione The detail made of correspondence etching improvement parts.
Content of parts various is disk rotor and is various numberplate wing props and is various emblems and is various mirror wiper seat belt wipers and is various obtaining pin wheel ballast wheel cover light reflectors, shift gate steering wheels, ABC pedal base plates, and etc . Even the detail of the interior exterior is collected to this set.
1/24 Dino 206 Competizione Mechanical parts Set. \2,100
@For TAMIYA company 1/24 MARTINI PORSCHE 935 TURBO The correspondence transformer kit set.
As for the content of the kit, the superprecision etching, the sawing thing, and the press parts are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.

šTransformer kit : \13,000
Superprecision etching part * Mechanical part Set.
+ Disk rotor & Caliper parts
Press parts

Sawing thing wheel ~4
Sawing thing Center rock nut ~4

šSingle goods bought easily ..various.. are prepared.

  Mechanical part Set.   \2,100
  Press parts              @\1,000
  Disk rotor Set.      @@@\3,100
  Wheel ~4                @\4,300
  Center rock nut ~4   \3,100
1/24 MARTINI PORSCHE 935 TURBO 5point Full Set. Full Set. \13,000
@For Fujimi company1/24 NEW FIAT 500 The detail made of correspondence etching improvement parts.
Content of parts various is intake mesh speaker mesh and is emblem and is various mirror wiper seat belt wipers and is various obtaining pin wheel ballast wheel covers, ABCF pedal numberplate steering wheel emblem base plates, and etc . Even the detail of the interior exterior is collected to this set.
Moreover, Abaltoparts of the custom manufacturer specification is collected to this product as a privilege.
1/24 NEW FIAT 500 Mechanical parts Set.
(FIAT 500 Abarth)
\2,100
@Made by the Acu₯Stion company, and 1/24&1/43 Center rock pin. It is installed as a dropout prevention pin of the central lock nut including the GT car. It made it to parts by the superprecision etching. It ..gimmick of a real similar car.. comes skilled if it combines with the sawing thing parts of another sales.
1/24 Center rock pin 1/24 \400 1/43 \300
@The transformer kit set of 312T3 for TAMIYA company. As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \18,500
Superprecision etching part * mechanical part set
+ disk rotor set + wing set
Vacuum parts

Sawing thing wheel ~4
Sawing thing Center rock nut Set.~4
Sawing thing Air funnel~12
Data plate~1(Either of @No.1 No.2 is selected. )

šSingle goods bought easily ..various.. are prepared.

  Mechanical part set     @ \2,100
  Wing set                 @@@\1,300
  Vacuum parts          @@@ \1,000

  Disk rotor set     @@@@@ \3,100
  Wheel ~4                  @@\4,200
  Central lock nut ~4   @ @\3,100
  
Air funnel ~12     @@@@ \2,400
  Data plate             @@@@\1,800
1/20 312T3 Detail up parts Set. (No.11 & No.12) Full Set. \18,500
@Made by the Acu₯Stion company and 2009 The FIA F-1 course map data plate. The course data of each war to GP1-GP17 is described clearly in detail. A full map is a generality and high commodity that becomes a calendar, and becomes an exhibition plate by the detached thing. Moreover, it buys and single goods are sold to various maps to be cheap. Please use it for GP that is your desire by all means.
2009 FIA FORMULA WORLD CHAMPIONSHIP
PLATE MAP Full Set.
Full map \4.900  Various maps \900
@It let go and 1/20 scales that were Sara joined the template series gotten popular. If the air brush is done by using Pescon on the market, the logo of the tire can be posted to a real similar car. It can be said to the model production the necessaries item. It recommends in the tire logo of @248 F-1 since as correspondence and it recommends
1/20 POTENZA arrow Tire Paint template Set. No.2 \1.600
@The transformer kit set of 248F1for Fujimi company.
As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \18,000
Superprecision etching part * mechanical part set
+ disk rotor set.
Sawing thing Center rock nut Set.~4
Sawing thing Air funnel~8
Sawing thing & etching refueling entrance~1

Data plate~1(Either of @No.5 No.6 is selected. )

šSingle goods bought easily ..various.. are prepared.

  Mechanical part set     @@ \2,200
  Disk rotor set     @@@@@@ \3,100
@Antenna Set.
@@@@@@@@@\1,200
  Center rock nut Set.~4 @\3,100
  Air funnel~8  @@   @ @@@\1,600
  
Air valve Set.~4     @@@@ \1,300
  Feller caps ~1  @ @@@@@\2,100
  Data plate             @@@@@\1,800
1/20 248 F1 Detail up parts Set. (No.5 & No.6) Full Set. \18,000
@The transformer kit set of 312T2 for Hasegawa company. As for the content of the kit, the superprecision etching, the sawing thing, and the vacuum part data plate are collected. Please assemble referring to the instruction of the kit and material in hand and look at the assembly method. I will reproduce the detail improvement to the detail.
Please test your skill by all means.

šTransformer kit : \21,500
Superprecision etching part * mechanical part set
+ disk rotor set + wing set
Vacuum parts

Sawing thing wheel ~4
Sawing thing Center rock nut Set.~4
Sawing thing Air funnel~12
Sawing thing & etching refueling entrance~3

Data plate~1(Either of @No.1 No.2 is selected. )

šSingle goods bought easily ..various.. are prepared.

  Mechanical part set     @ \2,200
  Wing set                 @@@\1,500
  Vacuum parts          @@@ \1,000

  Disk rotor set     @@@@@ \3,100
  Wheel ~4                  @@\4,200
  Central lock nut ~4   @ @\3,100
  
Air funnel ~12     @@@@ \2,400
  Fell caps ~3  @ @@@@@@\3,100
  Data plate             @@@@\1,800
1/20 312T2 Detail up parts Set. (No.1 & No.2) Full Set. \21,500
@For Hasegawa company1/20 The tire made of the etching template for 312T2. In the purpose of use, it is possible to use it for various F-1 as generality.
1/20 312T2 Good year Tire Paint template Set. \2,000
@For TAMIYA company 1/24 MARTINI PORSCHE 935 TURBO The detail made of correspondence etching improvement parts.
Content of parts various is intake mesh Rageetarpanel and is various emblems and is various mirror wiper seat belt wipers and is various obtaining pin wheel ballast wheel cover tire templates, refueling entrances, Kilsitti steering wheel base plates, and etc . The version improves to the detail of the interior exterior and it is collected to this set.
1/24 MARTINI PORSCHE 935 TURBO Mechanical parts Set. \2,000
@For TAMIYA company 1/24 MARTINI PORSCHE 935 TURBO The tire made of correspondence etching template. In the purpose of use, it is possible to use it for various cars as generality.
1/24 PORSCHE 935 TURBO Tire Paint template Set. (Good year & DUNLOP) \1,900
@For TAMIYA company 1/24 CALSONIC IMPUL GT-R(R35)  The detail made of correspondence etching improvement parts.
Content of parts various is Rageetarpanel and is various emblems and is various mirror wiper seat belt wiper disk rotors and is various obtaining pin wheel ballast wheel cover tire templates, pulling hooks, refueling entrances, ABC pedal meter rim base plates, and etc . The version improves to the detail of the interior exterior and it is collected to this set.
The refueling entrance set of sawing thing & etching has been released by another sales as an option parts.
  Moreover, I will recommend one set of the price for morality that consists of two point unit.
1/24 CALSONIC IMPUL GT-RiR35jMechanical parts Set. \2,200

It will update every month because there are too a lot of commodities and link, please.
Please claim General Cataloge want to learn all information.